The MB10N251 is a 10” neodymium mid-bass driver with
an excellent linearity, good efficiency and high power handling
capabilities. The 2,5” aluminium voice coil combined with a high
strength fibreglass former allows high efficiency and good frequency
response extension. Aluminium basket and magnetic assembly design
provide an excellent heat dissipation and very low power compression.
The M-roll surround shape combined to spider design offer good linear displacement and precise low frequency reproduction.
Features
2.5-inch , fibreglass former, aluminum voice coil
600 Watt continuous program power handling
97 dB Sensitivity
50 Hz - 3.5kHz Frequency range
Forced air ventilation
M-roll surround and exponential cone geometry
General Specifications
Nominal Diameter:250 / 10 mm/inch
Rated Impedance:8 Ω
Program Power:600 W AES
Power handling capacity:300 W AES
Sensitivity:97 dB
Frequency Range:50 Hz ÷ 3500 Hz
Effective Piston Diameter:210 / 8.27 mm/inch
Max Excursion Before Damage (peak to peak):40 / 1.57 mm/inch
Minimum Impedance:6.4 Ω
Voice Coil Diameter:64 / 2.51 mm/inch
Voice Coil Material:Aluminum
Voice Coil Winding Depth:14 / 0.55 mm/inch
Number of layers:1
Kind of layer:outside
Top Plate Thickness:9 / 0.35 mm/inch
Cone Material:No pressed pulp
Cone Design:Curved
Surround Material:Polycotton
Surround Design:M - roll
Thiele/Small Parameters
Resonance frequency:55 Hz
DC resistance:5.1Ω
Mechanical factor:4.1
Electrical factor:0.29
Total factor:0.27
BL Factor:15.2 T · m
Effective Moving Mass:36 g
Equivalent Cas air load:38.8 liters
Effettive piston area:0.035 m²
Max. linear excursion (mathematical):4.8 mm
Voice - coil inductance @ 1kHz:1.3 mH
Half-space efficiency:2.20%
Mounting information
Overall Diameter:260 / 10.24 mm/inch
Bolt Circle Diameter:241-246 / 9.5-9.6 mm/inch
Bolt Hole Diameter:5.5 / 0.21 mm/inch
Front Mount Baffle Cut-out:234 / 9.21 mm/inch
Rear Mount Baffle Cut-out:234 / 9.21 mm/inch
Depth:113 / 4.45 mm/inch
Volume occupied by the driver:1.2 / 0.04 liters/ft³
Mixer
